OIL PANS AND ACCESSORIES

Oil is an engine’s lifeblood and a high-quality Chevrolet Performance oil pan is what keeps it where it belongs. Properly designed and manufactured oil pens fit right, and when used with matching Chevrolet Performance gaskets, prevents leaks. We have oil pans for street and competition applications. Oil pans are sold without dipsticks or other hardware unless otherwise noted.

14091356

Corvette Oil Pan, 1965-1974

5-quart pan has a trap-door baffle that controls oil slosh during cornering and heavy braking
Windage tray is included and requires four mounting studs, P/N 3902885
Used on LS7 engine assembly P/N 3965774

10240721

6-Quart Oil Pan, Gen-V and Gen-VI

Six-quart pan fits all 1991-and-newer Gen-V and Gen-VI, 427, 454, 502, and 572 engines

12495360

4-Quart Oil Pan, Gen-V and Gen-VI

Fits 1991-and-newer Gen-V and Gen-VI 427, 454 and 502 engines
Fits many early model Chevelles Camaros
Includes a 4-quart oil pan, 4 main cap bolts, oil pump screen, oil level tube, oil level gauge, and oil pan gasket
Pan is not available separately

NOTE: Not intended for competition or spirited street driving. Oil sump capacity is insufficient for performance driving. Oil system starvation may result from expended high-rpm operation, hard cornering or rapid acceleration.

12557083

Dipstick, 6-Quart

For use with production 6-quart oil pan P/N 10240721 or P/N 14103141
Use oil dipstick tube P/N 12550533 and seal P/N 274244

12550533

Dipstick Tube, 6-Quart

For use with production 6-quart oil pan P/N 10240721 or P/N 14103141
Use oil dipstick tube P/N 12557083 and seal P/N 274244

Chevrolet Performance Big-Block Dipstick Tube For 6-Quart Oil Pans Part No. 12550533

274244

Oil Dipstick Tube Seal, 6-Quart

For use with production 6-quart oil pan P/N 10240721 or P/N 14103141
Use oil dipstick tube P/N 1250533 and seal P/N 12557083

3989391

Dipstick, 4-Quart

For use with the 4-quart oil pan kit P/N 12495360 for all Gen-V and Gen-VI engines
Use a dipstick tube P/N 329231

329231

Dipstick Tube, 4-Quart

For use with the 4-quart oil pan kit P/N 12495360
Use a dipstick tube P/N 3989391

14097040

Windage Tray

Use with the Gen-V and Gen-VI 454 and 502 engines

3967854

Windage Tray

Separates the oil from the spinning crank assembly to reduce aeration of the oil, aids in oil control and minimizes oil slosh under hard braking
Use with oil pan P/N 14091356
Requires four mounting studs P/N 3902885

88962187

Windage Tray, 572 Engine

Used on all 572-cubic-inch engines
Use with oil pan P/N 10240721, oil pan gasket P/N 19213986 and windage tray P/N 88958656

1931250

Oil Pump and Pick-Up, 572 Engine

For use with all 572-cubic-inch engines
Use with oil pan P/N 10240721, oil pan gasket
P/N 19213986 and windage tray P/N 88962187

3865886

Oil Pump Shaft

Heavy-duty all-metal
Intermediate shaft fits all Big-Block engines

19210599

Oil Pump and Pick-Up, Gen-V and Gen-VI

For use with the Gen-V and Gen-VI 454 and 502 engines with 1-piece rear main seal
Pump has 1.300" gears and will fit Mark IV engines
Distance from the mounting surface to the bottom of the screen is 5.870"

NOTE: Tack-welding pick-up tube to pump is recommended.

3955281

Oil Pump Pick-Up

Distance from pump mounting surface to lowest point of screen is 4.800"

NOTE: Weld or braze the pick-up tube to the pump cover for off-highway applications.

19299222

Oil Filter Adapter, fits Mark IV Blocks only

Mounts a spin-on cartridge oil filter
Contains a filter bypass valve used on all V-8 engines

25013759

Oil Cooler Bypass Valve

For high-performance and Bowtie Big-Block with 4-bolt main bearings caps
Must be installed in the rear hole behind the oil filter adapter bolt to route oil through the cooler